Santon Aquarius Vented Storage Water Heater
|
Application
Output / Capacity
Shipping: £7.14 inc vat, To UK mainland.
Are you subject to a Shipping Surcharge?
In Stock at Depots
|
Price: £113.35 inc vat
£94.46 ex vat
Product Code: 94010002
|
|
Product Code:
94010002
Santon Aquarius Vented Storage Water Heater Oversink 1.2kW / 7 Litres
MPN:
1.2kW / 7 Litres
|
|
Price: £113.35 inc vat
|
Buy the Santon 1.2kW / 7 Litres Aquarius Vented Storage Water Heater
 |
|
Product Code:
94010001
Santon Aquarius Vented Storage Water Heater Oversink 3.0kW / 7 Litres
MPN:
3.0kW / 7 Litres
|
|
Price: £98.16 inc vat
|
Buy the Santon 3.0kW / 7 Litres Aquarius Vented Storage Water Heater
|
|
Product Code:
94010004
Santon Aquarius Vented Storage Water Heater Oversink 1.2kW / 10 Litres
MPN:
1.2kW / 10 Litres
|
|
Price: £186.88 inc vat
|
Buy the Santon 1.2kW / 10 Litres Aquarius Vented Storage Water Heater
|
|
Product Code:
94010003
Santon Aquarius Vented Storage Water Heater Oversink 3.0kW / 10 Litres
MPN:
3.0kW / 10 Litres
|
|
Price: £166.16 inc vat
|
Buy the Santon 3.0kW / 10 Litres Aquarius Vented Storage Water Heater
|
|
Product Code:
94010009
Santon Aquarius Vented Storage Water Heater Undersink 1.2kW / 7 Litres
MPN:
1.2kW / 7 Litres
|
|
Price: £116.75 inc vat
|
Buy the Santon 1.2kW / 7 Litres Aquarius Vented Storage Water Heater
|
|
Product Code:
94010008
Santon Aquarius Vented Storage Water Heater Undersink 3.0kW / 7 Litres
MPN:
3.0kW / 7 Litres
|
|
Price: £116.75 inc vat
|
Buy the Santon 3.0kW / 7 Litres Aquarius Vented Storage Water Heater
|
|
Product Code:
94010011
Santon Aquarius Vented Storage Water Heater Undersink 1.2kW / 10 Litres
MPN:
1.2kW / 10 Litres
|
|
Price: £192.49 inc vat
|
Buy the Santon 1.2kW / 10 Litres Aquarius Vented Storage Water Heater
|
|
Product Code:
94010010
Santon Aquarius Vented Storage Water Heater Undersink 3.0kW / 10 Litres
MPN:
3.0kW / 10 Litres
|
|
Price: £192.49 inc vat
|
Buy the Santon 3.0kW / 10 Litres Aquarius Vented Storage Water Heater
|
As small vented water heaters are typically installed directly oversink or undersink, this Santon Aquarius Vented Storage Water Heater product is commonly referred to as “Point of Use”. Therefore the majority of units are installed directly over or adjacent to the point of application for light commercial duty such as washing cups and dishes. They can be supplied either directly from the mains or from an elevated cistern or feed tank (a minimum head pressure of 4 metres is required).
Santon Aquarius Vented Undersink
These can also be fed from the mains but only if one of the self venting taps (see opposite) is used. As with the oversink model, the special tap acts as an inlet valve so that when the tap is turned on, the cold supply is allowed to flow through the water heater, displacing the hot water into the basin. The outlet part of the tap is always open to atmosphere allowing the expanded water to drip from the tap into the basin during the heat up cycle. Undersink models can also be connected to a cold water cistern or feed tank as long as the vented tap is used or a vent pipe is plumbed from the hot pipework to discharge the expansion back into the cistern. In such cases, the base of the cistern must be no higher than 10 metres above the top of the water heater and a vent pipe must be used.
Undersink vented water heaters are only able to supply one basin when used with vented taps. Aquarius undersink products are available in 7 and 10 litre capacities with options for 3 and 1.2kW element ratings. The 3kW element provides a fast recovery from cold whereas the 1.2kW version means that Aquarius can be fitted in situations where the power supply may be limited, such as portable or temporary buildings.
Santon Aquarius Vented Oversink
An oversink unit is supplied with an inlet valve that, when opened, allows the mains cold water supply to enter the heater and displace the hot water stored in the cylinder. As the valve controls the displacement, the outlet is open to atmosphere so that when the unit heats up, the expanded water is allowed to drip from the spout into the basin. No other outlet should be used in conjunction with this type of product.
Aquarius oversink products are available in 7 and 10 litre capacities with options for 3 and 1.2kW element ratings. Typically, they are supplied from the water mains although supply from a cistern can be used as long as there is a minimum head pressure of 4 metres. The 3kW element provides a fast recovery from cold whereas the 1.2kW version means that Aquarius can be fitted in situations where the power supply may be limited, such as portable or temporary buildings.
Product Code
|
Model No.
|
Type |
Output / Capacity |
| 94010001 |
A7/3 |
Oversink |
3kW / 7L
|
| 94010002 |
A7/1 |
Oversink |
1.2kW / 7L
|
| 94010003 |
A10/3 |
Oversink |
3kW / 10L
|
| 94010004 |
A10/1 |
Oversink |
1.2kW / 10L
|
| |
|
|
|
| 94010008 |
AU7/3 |
Undersink |
3kW / 7L |
| 94010009 |
AU7/1 |
Undersink |
1.2kW / 7L |
| 94010010 |
AU10/3 |
Undersink |
3kW / 10L |
| 94010011 |
AU10/1 |
Undersink |
1.2kW / 10L |
(Only registered customers can rate)
There are no comments for this product.
|
|
Goes Great With..
TXH01
£100.04 inc vat
TXH02
£167.27 inc vat
Delivery In 2 - 3 Business Days Or Less
Every effort will be made to deliver the goods in 2 to 3 business days or less once your order has been accepted.
Items are usually in stock, however due to our high turnover it is inevitable that we sometimes we run out of stock. If this is the case we will inform you of any delay as soon as possible.
close