Danfoss Clamp-On Mechanical Thermostat
|
|
Shipping: £5.94 inc vat, To UK mainland.
Are you subject to a Shipping Surcharge?
Spend Over £200 for Free Shipping
In Stock at Depots
|
Price: £15.00 inc vat
£12.50 ex vat
Product Code: ATC-041E001000
|
|
Product Code:
ATC-041E001000
Danfoss Clamp-On Mechanical Thermostat Cylinder
MPN:
ATC Cylinder
|
|
Price: £15.00 inc vat
|
Buy the Danfoss ATC Cylinder Clamp-On Mechanical Thermostat
 |
|
Product Code:
ATF-087N671200
Danfoss Clamp-On Mechanical Thermostat Pipe/Frost
MPN:
ATF Pipe/Frost
|
|
Price: £25.84 inc vat
|
Buy the Danfoss ATF Pipe/Frost Clamp-On Mechanical Thermostat
|
|
Product Code:
ATP-041E000000
Danfoss Clamp-On Mechanical Thermostat Pipe
MPN:
ATP Pipe
|
|
Price: £37.44 inc vat
|
Buy the Danfoss ATP Pipe Clamp-On Mechanical Thermostat
|
The Danfoss AT Clamp-On Mechanical Thermostat range is an electro-mechanical
surface mounting range of thermostats, available for either cylinder, pipe and
pipe/frost protection.
ATC Cylinder Thermostat
The ATC is a cylinder thermostat switches on and off the heat supply from the boiler to the hot-water cylinder, it works by sensing the temperature of the water inside the cylinder, switching on the water heating when the temperature falls below the thermostat setting, and switching it off once this set temperature has been reached.
Turning a cylinder thermostat to a higher setting will not make the water heat up any faster. How quickly the water heats up depends on the design of the heating system, for example, the size of boiler and the heat exchanger inside the cylinder.
The water heating will not work if a time switch or programmer has switched it off. And the cylinder thermostat will not always switch the boiler off, because the boiler sometimes needs to heat the radiators.
Cylinder thermostats are usually fitted between one quarter and one third of the way up the cylinder. The cylinder thermostat will have a temperature scale marked on it, and it should be set at between 60°C and 65°C, then left to do its job. This temperature is high enough to kill off harmful bacteria in the water, but raising the temperature of the stored hot water any higher will result in wasted energy and increase the risk of scalding.
If you have a boiler control thermostat, it should always be set to a higher temperature than that of the cylinder thermostat. In most boilers, a single boiler thermostat controls the temperature of water sent to both the cylinder and radiators, although in some there are two separate boiler thermostats.
ATF Pipe Frost Thermostat
The
ATF is an electro-mechanical surface mounting pipe thermostat for use
in frost protection applications. It can be clamped onto steel or copper
pipes which have a diameter of between ½” (15mm) and 2“ (50mm).
ATP Pipe Thermostat
The ATP is an electro-mechanical surface mounting pipe thermostat, which can be clamped onto steel or copper pipes which have a diameter of between ½” (15mm) and 2” (50mm). Typical applications include return temperature control in oil-fired systems.
(Only registered customers can rate)
There are no comments for this product.
|
|
Not Sure? This May Be A Better Buy For You..
HCT2
£15.79 inc vat
£49.42 inc vat to £96.11 inc vat
Delivery In 2 - 3 Business Days Or Less
Every effort will be made to deliver the goods in 2 to 3 business days or less once your order has been accepted.
Items are usually in stock, however due to our high turnover it is inevitable that we sometimes we run out of stock. If this is the case we will inform you of any delay as soon as possible.
close