Zip InLine ES Instantaneous Water Heater
|
Shipping: £6.48 inc vat, To UK mainland.
Are you subject to a Shipping Surcharge?
Spend Over £200 for Free Shipping
In Stock at Depots
|
Price: £185.76 inc vat
£154.80 ex vat
Product Code: ES3
|
|
Product Code:
ES3
Zip InLine ES Instantaneous Water Heater 2.8kW
MPN:
2.8kW
|
|
Price: £185.76 inc vat
|
Buy the Zip 2.8kW InLine ES Instantaneous Water Heater
 |
|
Product Code:
ES4
Zip InLine ES Instantaneous Water Heater 4.4kW
MPN:
4.4kW
|
|
Price: £201.72 inc vat
|
Buy the Zip 4.4kW InLine ES Instantaneous Water Heater
|
|
Product Code:
ES6
Zip InLine ES Instantaneous Water Heater 5.5kW
MPN:
5.5kW
|
|
Price: £210.53 inc vat
|
Buy the Zip 5.5kW InLine ES Instantaneous Water Heater
|
The Zip InLine ES Instantaneous water heater provides an unlimited hot water supply for handwashing. The 'Bare Wire' technology means fast heat up for the water for only the water drawn off, therefore no standing heat loss and the Electronic Power control adjusts to compensate for inlet pressure and temperature variations
Features and benefits
- Flow rate of 1.6 – 3.0 litres/minute
- Choice of 3, 4 and 6 kW ratings
- Smart, compact design
- For use only with taps with removable M22/M24 nozzles
Description
- Zip InLine ES provides energy efficient hot water for handwashing
- Heating power is controlled electronically to maintain set temperature
- Outlet temperature factory set to 38°C, but can be adjusted inside the unit between 30°C and 50°C.
- Electronic power control to compensate for inlet pressure and temperature variations
- Stainless steel bare wire heating element for fast heat up
- Double pole over temperature protection
- For use only with taps with removable M22/24 nozzles
Location
The appliance must be installed in a frost free environment. Zip ES products comply with IP24 and may be installed in Zone 1. The unit should be positioned as close as possible to the outlet to minimise heat loss.
Plumbing
The appliance is intended for connection to the mains water supply. It should be installed by a suitably qualified person. It may be used as an unvented installation, as shown in the diagram below, or as a vented installation as described in the fitting instructions.
For correct operation it is essential that the special tap nozzle supplied is fitted to the tap spout. Only taps with removable M22/24 nozzles should be used.
Electrical
The appliance must be earthed and connected to the mains supply by means of permanent wiring through suitable isolation having a contact separation of 3mm in all poles and may only be operated if protected by an RCD rated at 30mA.
Installation must be installed in accordance with current IEE regulations
(Only registered customers can rate)
There are no comments for this product.
|
|
You May Want To Buy One Of These As Well..
£503.06 inc vat to £545.90 inc vat
Delivery In 2 - 3 Business Days Or Less
Every effort will be made to deliver the goods in 2 to 3 business days or less once your order has been accepted.
Items are usually in stock, however due to our high turnover it is inevitable that we sometimes we run out of stock. If this is the case we will inform you of any delay as soon as possible.
close